Maintenance Membership

Our ceramic coating maintenance membership is designed to keep the investment you made by getting a ceramic coating looking and performing its best. We only use Gtechniq products, this ensures your car’s coating is protected and always performing to its highest standard. All Gtechniq products are coating & clearcoat safe. The membership is noncontractual, can be canceled at any time, and is billed after each service is completed.

HOW IT WORKS

These services are mobile. We will come to your at home, work, or even a spa appointment, whatever works for you.

Mobile services are only available at temperatures above 45 degrees. 

To ensure the best performance from your coating, these services are recommended on a monthly basis, (one detail per month). It is best to keep your vehicle on a consistent detail/decon schedule, once we discuss your maintenance needs we will provide a list of available days/times for you to choose from. This will be your recurring monthly maintenance program. However, every 3 to 4 details will need to be a decontamination (DECON) detail. These kinds of details are necessary to keep the embedded contaminants of daily driving from damaging your coating, clear coat, or paint. Fill out the contact us form to the right to get the discussion started.

***Read below to learn what each detail entails.

Still in need of a ceramic coating? Click HERE to learn about our Gtechniq Ceramic Coating options.

MONTHLY MAINTENANCE DETAIL

This is the detailing service that will be the backbone of your maintenance program. With this service, we will keep your vehicle looking great and your Ceramic Coating performing its best. We only use Gtechniq products, this ensures your car’s coating is protected and always performing to its highest standard. All Gtechniq products are coating & clearcoat safe. The full service will consist of the process described below.

Exterior

  • Foam surfaces with a gentle neutral PH cleansing shampoo & conditioner
  • Hand clean vehicle of all dirt, silt, and other surface contaminants
  • Remove filth from the gas cap / EV Charging port
  • Clean jams and seals on the
    • Trunk / Cargo space
    • Door
    • Hood
    • Sunroof
  • Rinse with purified water
  • Use forced air to remove any additional water trapped in seams, door jams, badging, and wheels
  • Check windshield wiper fluid, and refill if needed
  •  Apply Gtechiq C2v3 coating enhancement.
    • This is the product that will help keep the investment you made with your ceramic coating lasting & performing its best.

** Basic interior detail **

  • Vacuum
  •  Clean all touched surfaces

GET TO KNOW C2v3 A LITTLE BETTER

DECON DETAIL

This is the detailing service that will be performed less frequently but is absolutely mandatory for the longevity of your coating. As you drive on the roads of GA there will be micro iron particles from the braking systems of other vehicles, chemical waste from road construction along with any number of other damaging contaminates that will embed into the coating system you have had installed. If not routinely removed from the surface of your vehicle, they will give the effect of premature failure of your coating. If left unattended, will cause permanent damage.

The decontamination (DECON) detail will start with the following 3 decon steps, then finish with the monthly maintenance detail described above.

  • W4 Citrus Foam
  • W5 Citrus All-Purpose Cleaner
  • W6 Iron & General Fallout Remover

 

Take 6 minutes and let the guys at Gtechniq UK explain the importance of a DECON detail.